BotronikS - Final code for all types of Arduino and PC users: -- HOME -- email: botronik@gmail.com

7Segments TM1637 display

Link: 1-2- 3-4

DS18B20 Temp. sensor

Link: 1-2-3-4

 
connections (click to enlarge)
need accessories
 

TEM2: 2x Thermometer for sensor DS18B20 with 2x 7 segments TM1637 LED display - FREE!
The offered code enables: Temperature display from the 2x sensor on the 2x LED display
Required accessories: (see connections)
For Arduino boards: NANO or UNO or MEGA
 
Electrical and practical notes:
Uses 9V/1A external power supply (VIN/GND) on DC plug (or external 5V/1A on 5V/GND pin).
Display of the measured value is in the form of one decimal digit.
Use specified type of 7 segments display with decimal points only (not clock dots).
S1/S2 Switch selector for temperature display in Celsius or Fahrenheit
P1/P2 Display brightness selection potentiometer (0-7)
 
Download the HEX codes below, unpack and upload to the proper Arduino board (Use a free net tool for example XLoader)
1. uc ATmega328-16MHz-5V (NANO,UNO...) - TEM2code1-m328
2. uc AtMega2560 (Mega(ATMEGA2560).....) - TEM2code1-m2560