PS9V/1A Power supply unit Link: 1-2-3-4
arduinos
need accessories
connections (click to enlarge)
Botroniks Arduino ready-made hex code project - LDP0010: Thermometer for sensor DS18B20 with 7 segments TM1637 LED display - FREE!
| BotronikS - Final code for all types of Arduino and PC users: -- HOME -- CONTACT |
|
Link: 1-2-3-4 |
|||||
|
||||||
|
||||||
arduinos |
need accessories
|
connections (click to enlarge) |
||||
| TEM1: Thermometer for sensor DS18B20 with 7 segments TM1637 LED display - FREE! |
| The offered code enables: Temperature display from the sensor on the LED display (C/F) |
| Required accessories: - see above |
| For Arduino boards: NANO or UNO or MEGA |
| Arduino pins are used: |
| uc ATmega328p (NANO, UNO, ...): (see connections) |
| uc AtMega2560 (MEGA,.............): (see connections) |
| Electrical and practical notes: |
| Uses 9V/1A external power supply (VIN/GND) on DC plug (or external 5V/1A on 5V/GND pin). |
| Display of the measured value is in the form of one decimal digit. |
| Use specified type of 7 segments display with decimal points only (not clock dots). |
| S1 switch selector for temperature display in Celsius or Fahrenheit |
| P1 Display brightness selection potentiometer (0-7) |
| Download the HEX codes below, unpack and upload to the proper Arduino board (Use a free net tool for example XLoader) |
| 1. uc ATmega328-16MHz-5V (NANO,UNO...) - Code1-m328 |
| 2. uc AtMega2560 (Mega(ATMEGA2560).....) - Code1-m2560 |
| PC Application(s): no |
| Proj Pic: Temperature in Cesius or in Fahrenheits | |||
 |
 |
||